6 Electricity Conservation Tips To Save Money

With today’s rising electricity costs, it’s only fitting to find effective ways to conserve energy. Everything that attaches to your electrical system will eat up a certain amount of electricity every time you use them. Everything from your light bulbs, your fridge, your HVAC unit, and other household appliances use up electricity. But how can you conserve electricity? If you’re a concerned homeowner, you’ll likely look for a bunch of ways on how to reduce the energy consumption in your home without making compromises. As it turns out, you can. There are ways on how to lower your energy consumption at home without compromising comfort. Here are some ways on how you could lower your energy usage at home:

Energy saving tips that electricians recommend

Use energy efficient lights – did you know that lighting alone takes up 17% of the entire energy consumption in the United States? It’s a huge figure. However, energy consumption at home can significantly be lowered with the use of correct lighting. Old incandescent and fluorescent lamps eat up more electricity than newer LED lights. You can even go further and install LED lights that have motion sensors in them, allowing the lights to turn off when nobody is around and turn on when a person is nearby. This option is far more expensive, though. On the upside, using cheap LED lights can save you a lot of money per year. Lowering heating costs – if you’re living in colder areas of the United States, you’ll likely be cranking up that heater when it gets too cold. However, there are ways to lighten the load on your electric heater. You can upgrade to more efficient models. Ask your local electrical contractor about it. Other than that, you can also improve your insulation and improve ventilation in your home for better efficiency. Cutting cooling costs – it’s always a drag when the summer heat kicks in. The average homeowner just doesn’t have many options other than turning on the AC unit to keep cool. However, using an AC unit doesn’t always have to be hard on your electricity bill. You can do things like wearing lighter clothing, keep yourself hydrated, and eating food that helps cool the body. Cut back on dryer usage – if you do a lot of laundry, you might want to cut back on using the dryer. If you live in an area with warmer climate, it’s better off to let your clothes air dry instead. Although, this may not be applicable in areas with a lot of rain. Unplug those appliances – you might not notice it, but a lot of appliances still eat up electricity even when you power it off on the remote. Most of these appliances don’t really cut off the power in the system. Instead, they go on idle but still consumes electricity. If you can, unplug all your appliances when not in use. This way, you can save on electricity quite easily. You’re local electrical contractor Florence would know about this. Go for a smart thermostat – older thermostat models need to be manually adjusted, which could lighten or increase the load on your HVAC system. This often leads to inefficiency. However, smart or learning thermostats offer a better approach. Instead, these thermostats learn your habits and adjust the temperature accordingly. Professional electrical contractors like Florence Electrician Pros install these all the time and know the efficiency they provide.

If you need expert assistance on electrical problems, call Florence Electrician Pros. We would love to help!

Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/6-conservation-tips-to-save-money/

Electricity Tips – Electric Units Homeowners Should Know

When it comes to the energy that you use in your home, it all boils down to a few units of measurements. In a household, electricity is often measured in volts, watts, and amps. It’s important to understand the meaning of each and how they can be useful in our daily lives. The electrical system in your home is feeding off electricity from the grid at a certain rate. This is important because too much energy can fry all of your appliances. It is also essential to get to know the basics of how electricity works. Here’s a brief explanation of electric unit measurements and how it affects your life:

Electric terminology your electrician would normally use

You’ll often see a bunch of information on the labels of appliances and other electrical equipment. If you have no clue as to what the specifics indicate, you should continue reading on. Basically, appliances and all electrical equipment run on certain amounts of electricity. It’s important to know just how much since this will let you know which ones consume more power. Your electrician knows a lot about this and you should ask them whenever you have one around. Here’s what volt, amp, and watt mean A watt is basically the amount of energy that is either generated or consumed by electrical equipment. To get how many watts is either produce or spent, you need to multiply the voltage by amperage. A volt, on the other hand, measures the potential energy between two points or voltage which is electrical pressure. Meanwhile, an amp is how amperage is measured. This basically measures the rate at which electricity is flowing. In general, appliances and lighting fixtures found in your home have a certain specification on how much energy they draw in to work. Knowing this information helps users understand what an energy efficient product is and what is not. Your appliances, for instance, consumes power in different amounts. Always ask your local electrician about the best brands and models to end up with the best in terms of performance and energy efficiency. Experts like Florence Electrician Pros will know just what to recommend. How you can save electricity at home

1. Buy energy efficient light bulbs – older incandescent light bulbs eat up more electricity than more modern LED light bulbs. When you compare LED and incandescent bulbs, the difference in terms of energy consumption is huge. For the same amount of illumination, LED light bulbs consume just one third to just a quarter of the energy a normal incandescent bulb would spend.

1. Unplug all appliances when not in use – it’s a rule of thumb to disconnect any appliance that is not in use. Although it may not be turned on, it still consumes electricity in small amounts.

1. Upgrade your appliances to newer, energy-efficient models – as the year goes by, more energy efficient models of your favorite appliances emerge. These models eat up less electricity with better performance than previous generations. Call your local electrician Florence for more information about the newest energy efficient technology available.

1. Limit the use of high-consumption appliances – some appliances just require a lot of energy to function. Regardless of energy efficiency, there are appliances that have high wattage. You should reduce the use of these appliances should you wish to save on energy bills.

For more information on the installation of new appliances, call Florence Electrician Pros today!

Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/electric-units-you-should-know/

Florence Electrician On Whole House Surge Protection

You probably first heard about whole house surge protection and its importance from your Florence electrician. This is because not a lot of homeowners know about this type of electrical protection and how it can actually protect them, their family and house. In this article, you will learn about whole house surge protection, its benefits and why you should invest in them.

How does it work?

A whole house surge protection works similar to a security guard. It allows only the electricity that is safe for your home to enter your electrical system and keeps over-voltages from entering. Because of this, your gadgets and devices are protected from being damaged by sudden surges of electricity from over-voltages that have accidentally entered your system. If you are considering installing a whole-house surge protective device, have your Florence electrician to install it near your primary electric service box so that it will be able to protect all of your appliances and devices.

Why you should you install a whole house surge protection in your home

Experts strongly suggest installing a whole house surge protection in your home if you still do not have one. The primary reason for this is because an average house today uses several different electronic appliances in addition to the various devices and gadgets that they use for doing work and for entertainment. Indeed, a household today depends more on electricity than a household a couple of decades ago. Gone are the days when a house can survive with only an HVAC and a washer. Today, a household uses a lot more electric-powered devices and gadgets such as a couple of TV’s, a wi-fi modem, water heater, swimming pool heater, automatic pool covers, and a couple of computers and laptops. The continuously increasing need for electricity is the primary reason why every household should have a whole house surge protective device. Keep in mind that the more you need electricity, it is more likely that over-voltage surges could enter your home through your service box. The only thing that could prevent these from entering, causing problems to your home and family, is a whole house surge protective device installed and wired into your primary electric service box. In addition to the over-voltages that could potentially enter your home, a whole house surge protective device also protects your home from the dangers caused by mini-surges inside your home. Although these mini-surges do not directly cause problems to your electric system, they can wear out your devices over time, especially if these mini-surges happen frequently. What they do is that they cause the device or gadget to wear out and eventually perform less effectively. As a result, their lifespan reduces.

Why whole house protection?

The primary reason why a whole house surge protective device offers whole house protection is that your electrician will wire it into your service box. This way, it is able to protect the wiring throughout the house; thus, protecting every light switch and outlet including every appliance, device, and gadgets plugged into the outlet or connected to the light switch.

To know more about whole house surge protection, call Florence Electrician Pros.

  Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/florence-electrician-house-surge-protection/

Electrical Safety – Upgrading Electrical Outlets

Whenever you need to charge your phone, use your hair dryer, or just about any electrical appliance, you quickly turn to the nearest wall outlet. It’s a fact of modern day life that we just can’t ignore or live without. We all rely on electricity to go on with our daily lives but is there any thought given to the electrical components inside your home especially that electrical outlet you often use? Most of us don’t. This practice has got to end. Electrical outlets require upgrades from time to time. With constant use, they can wear out and can be potentially hazardous. It is best to know when and how you should upgrade your outlets.

When is the right time to upgrade electrical outlets?

When you spot something weird with your electrical outlet, you should dig a little deeper. Sometimes, these tiny details are signs that a problem is about to happen. Don’t wait until then. When you are experiencing the following issues, you should consider calling your electrical contractor and have it fixed:  

• If there isn’t enough three-pronged sockets or there are none at all
• When you see sparks every time you plug in appliances
• If there is smoke when in use
• When you see discoloration on the outlet
• When there are no GFCI outlets available in rooms where water is used
• If the outlets get warm while in use
• If the sockets won’t secure plugs properly
• If there are frequently tripping circuits
• If power is inconsistent or shuts off for no reason

Types of outlets you should upgrade to GFCI outlets – GFCI outlets or ground fault circuit interrupters are outlets that protect against electrical shock. Instead of being continuously shocked when in contact with a live connection, the GFCU outlet cuts of the electrical connection to avoid further shock. You will still be shocked but only within a fraction of a second. Having GFCI outlets in your home will make it safer for homeowners with children. AFCI outlets – AFCI or arc fault circuit interrupters are used to reduce the instances of fires caused by electrical arcs. AFCI outlets constantly monitor the circuit for possible electrical arcs to ensure that no electrical fires spring from the outlet while being used. There are other outlets available that are used for special purposes. USB outlets, LED night light outlets, recessed outlets, pop-up outlets are only some of the other type of outlets being used in homes. If you wish to have these types of outlets installed in your home, call experts like Florence Electrician Pros for assistance. How are electrical outlets upgraded? There are various ways on how the electrical outlets in your home are upgraded. If you want to have yours upgraded, call your local electrical contractor Florence for more information. First of all, the power needs to be shut off through the electrical panel. Then, the cover plate for the old outlet is removed along with the screws and the wire connecting to the outlet is loosened and the new outlet is installed. The installation process may vary depending on the type of outlet since more complex outlets require an intricate process.

Call Florence Electrician Pros if you have any electrical-related issues.

Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/electrical-safety-upgrade-outlets/

Signs That Indicate When To Upgrade Your Electrical Panel

In a nutshell, your electrical panel is what serves as the heart of your house’s electrical system. It feeds electricity to all other circuits in your home what connects onto it. Overall, the electrical panel makes servicing easy and it protects your home from electrical problems. Most, if not all, homes have at least one installed. Through years of constant uptime, your electrical panel will require some maintenance or an upgrade. But how do you know when the time is right for an upgrade? What are the tell-tale signs that indicate an upgrade is due? Read on to find out.

Why do you need to upgrade your electrical panel?

Aside from feeding electricity into different parts of your home, the electrical panel also prevents damages due to electrical shorts, faulty wiring, overloads, and more. Once the system encounters a short or overload on a specific line, the breaker trips and cuts off connection to prevent serious issues. As the electrical panel ages, the chances of it malfunctioning grows more significant. Defective wiring One of the primary reasons in the United States is faulty wiring. The risk, however, is dependent on how old a house or building is. Most of the time, faulty wiring is a problem for older structures. A newer home is unlikely to have such issues, but there is still a possibility. One instance where faulty wiring could be found is when it was not properly installed. It is essential that the electrician who laid out the wiring for the building is knowledgeable and did the job well. Common indications of faulty wiring include, but are not limited by, sparks in power outlets, flickering lights, and burning smell when using appliances. Older fuse panels There are still homes that have fuse panels still in operation. Although fuse panels could still be a viable form of protection, they aren’t as safe as circuit breakers. If you find that some parts of your home still use fuse panels, have them replaced immediately. Contact your local electrical contractor like Florence Electrician Pros and have them upgraded. Home remodeling When you remodel your home, you’re bound to add in new lighting fixtures, appliances, and more. This means you need to upgrade your electrical panel to cater to these new changes. Again, the best thing that you could do is hire an electrician Florence. Electrical system shows unusual behavior When you notice minor changes on how your appliances work, have it checked out. When your electrical system is working as intended, there won’t be any noticeable issues. Always call your electrician right away if you find any problems with your electrical panel or anything electric in your home. Never assume that everything is fine or that the problem would just go away. The reality is that electrical problems do exist and when they appear, you need to deal with them the right way. Never DIY anything that involves electrical panels and or any electrical concern, always have your local electrician fix it to contain the problem as early as possible.

For more information on electrical upgrades, call Florence Electrician Pros.

Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/signs-to-upgrade-electrical-panel/