Thursday, November 24, 2016

List for Employing a Florence Electrical Contractor

Electrical Contractor FlorenceEmploying an electrical expert is an important choice that can impact the worth of your house or organization. If you pick improperly, you might downgrade your investment. If you select carefully, you will enhance your investment. Not to mention that if you do not hire somebody who is qualified for the task and brings all the essential licensure required by your state, you may be breaking laws, or at least you could be putting yourself at threat for damages and even fires.


Get Suggestions from Family & Friends


The very first thing you should do when you find that you require an electrical contractor is to ask friends and family for some suggestions. You want to choose somebody who has in fact done a job just like your needs for somebody you know.


Ensure That the Electrician is Licensed


This requirement varies by state and location. You want somebody who is accredited general journey level or specialty electrician. They need to have the ideal education and experience to pass exams to be a qualified electrical contractor.


License, Insurance & Registration


Prior to you even bother speaking with someone check to see if they are certified, guaranteed, and registered with the right authority needed by electrical experts. If they're not insured with adequate liability insurance and something fails, you might be delegated pick up the tab.


 Ask for Written In-depth Quotes


Always ask your electrical expert for an extremely detailed price quote in writing. Ensure that they not just put exactly what is covered however what is not covered in their price quote so that there is no confusion about what you are being billed for.


Know How is Billing Done


Is billing done hourly and if so how much? Is it done by task, if so just how much? Just how much is charged if surprises turn up and will they warn you if surprises have shown up? Understand all that you can about how you will be billed.


Request a Written Contract


Always get a written contract that spells out exactly what the electrical contractor is going to do, for just how much, and includes all the payment details consisting of ways to pay. If the contract spells whatever out to the letter about exactly what will and wont' be done, and what is your obligation compared to the electrical experts obligation there will be less issues and confusion.


Pay With Credit Card


If you pay your electrician with a credit card and you find something missing out on in the quality of the work or that the work is not completed to your contract and to your satisfaction paying by credit can offer you a little extra coverage. You can challenge the charge while making certain the work is finished.


When you look for to hire an electrical contractor, whether for a small task or a big task, it is very important to follow this checklist to prevent problems down the road. You want to keep the worth of your greatest financial investment and you can't do that if you take faster ways.


When your project calls for an electrician, call Florence Electrician Pros for a free estimate.


Florence Electrician Pros

Florence,SC  29501

843-212-4173

http://electricianprosflorence.com/

Thursday, November 17, 2016

Who Do You Call: An Electrician or a General Contractor?

Electrician FlorenceWhen you are making home improvements, renovating, or just need repairs done, how do you know who to call. When you do call an electrician, and when do you contact a general contractor? It really depends on what kind of work you are having done, and what is involved.


What does a general contractor do?


A general contractor is someone who is hired to oversee or manage a project, in this case likely to do with construction or renovations. A general contractor can have different specialties and licenses, and he or she can have people that work directly under them, also called sub-contractors. A general contractor typically has a contract with the client regarding the overall expectations of the project, and is directly responsible for the outcome of the project.


A general contractor is usually not an electrician, but some general contractors are also licensed electricians. Some general contractors, even if they are not electricians, might be approved to do minor electrical work during a project.


What does an electrician do?


An electrician is a specialty contractor. He or she is a person that specializes in the installation and maintenance of electrical equipment. There are different levels of knowledge for electricians. Some electricians only do minor jobs such as changing or installing light fixtures, outlets, and switches. Others, usually licensed electricians, can do just about anything to do with the electrical systems in your house or business.


There are varying levels of licensing for electricians, starting at Trainee all the way up to Master Electrician. Electricians that do work in your home or business should have an Electrical Contractor license at the very minimum.


How do I know which one I need?


When you are completing a project involving the construction or destruction of a part of your home, you will likely seek the services of a general contractor. A general contractor is the one with the knowledge of construction, and likely has at least some knowledge of plumbing and electrical to make small changes or repairs during the project. If during the project the general contractor needs actual electrical work done that can only be done by an electrician, he or she will recommend someone to bring on to the project. Usually the electrician is only called when they are needed.


If your project only involves wiring or other electrical issues, you likely need just an electrician. He or she will tell you if you need the expertise of any other professionals when you are explaining the project or when they come out for an estimate or to do the work.


As always, when hiring any professional contractors of any type, make sure that you are hiring a reputable professional that has good references, and is licensed and insured. These guidelines keep you, your home, and the contractor safe in the event of an accident. Contractors of all types, general contractors and electricians included, should be licensed and insured in your state without exception.


When your project calls for an electrician, call Florence Electrician Pros for a free estimate.


Florence Electrician Pros

Florence,SC  29501

843-212-4173

http://electricianprosflorence.com/

Sunday, November 6, 2016

Installing Lighting Fixtures

Lighting Fixtures FlorenceIt is often recommended that you work with a certified electrician whenever you are working around any type of electrical components, however, if you are daring, there are a couple of chores that some do-it-yourselfers tackle. The following is what is involved with installing most light fixtures so consider this prior to you decide to do-it-yourself.


No two lighting fixtures are precisely the same so there are no generic steps to install them. Complete diagrams and specific instructions accompany most brand-new lighting fixtures. Be sure you file them where you will be able to find them when needed.


If you are adding a fixture as opposed to replacing one, you might want to run a new circuit. You can tap into the existing power from a circuit that already exists but beware not to overload the circuit causing the breaker to trip.


One of the big headaches when installing a light fixture is to get all the components installed right. While framing the fixture in place, it is a good idea to nail up an extra cross brace.


It may be necessary to pull out some existing drywall if you are planning to retro-fit and include more bracing for the fixture. Or you will need to settle for placing the fixture on an existing ceiling joist or stud.


When constructing a new home, any recessed lighting is installed after the framing is complete and before drywall. If you want to install recessed lighting after the house has been built, you might want to retro-fit recessed illuminate to enhance certain details in the room.


If you are installing recessed lighting in an existing residence you will need to have a mounting bracket that will fit around the hole created when mounting the lighting fixture.


To mark the size of the hole properly, use the fixtures housing as a guide. Cut the hole using a keyhole saw. Some of these steps may be different depending on the type of fixture you are installing. For this reason it may be helpful to call a Florence electrician for help.


Mark the location of the new fixture. You should run the incoming power directly to the light fixture then run the cable down to the switch to make a loop.


To install the light, you will take the frame brackets up into the opening. Position the component so it is flush with the bottom of the wood framing. Secure the frame to the joists by pounding in the metal teeth on its supporting limbs. Make sure that insulation is at least 3″ far from recessed lights, unless illuminate is specifically labeled as “I.C.”( Insulated Ceiling) to prevent fire or overheating which could lead to a fire.


Small mounting clips should have been included with the fixture which will hold the recessed light in place.


Make sure that you do any necessary painting before you add the reflector shield and the bulbs. The shield will click into place.


Ceiling Fan Installation


How you install a ceiling fan depends upon the type of fan you select. You should follow the producer's instructions that are included with the ceiling fan.


Nearly all ceiling fans require a unique ceiling fan-rated junction box fastened to a ceiling joist.


If you are constructing a new residence, you need to select the location of the fan which will usually be near the center of the room. If this location is not near a cross joist, you will need to add a brace between the ceiling joists. Then you will put up a junction box so that it is flush with the ceiling and run the power to the ceiling fan leaving about a foot of cable for connections.


At this stage you can hang the drywall or whatever wall covering you plan to utilize. Cut around the outside rims of the box taking care not to cut the electrical cable then finish repairing the drywall.


Rest the fan on a ladder and fasten the installing bracket to the junction box. Connect the cable and follower wires together, attaching each pair with a wire connector.


Lift the fan into place and fasten it to the mounting bracket ensure the ornamental covering is on then slip the decorative covering into location.


Track Lighting


You can include versatility and beauty to a space's design strategy by including track lighting. It is fairly easy to install a new fixture on an existing ceiling. You will need to install a brand-new junction box and run changed strength to package on a brand-new cable if you are not supplanting an existing light fixture.


Initially, orient the track so the bulbs deal with the things you wish to emphasize at about a 30 degree angle.


A light kit will usually have linking wires, but you can purchase them if you have to. Merely cut a piece of cable long enough to connect various sources cable and reach the track terminals. Strip the cable and link each wire. Cap the connections with wire connectors and fold them into place. Feed the wire intention through the fixture's mounting plate then secure it to the box. Feed completion of the wire through the track opening at the terminals. Fasten the track to the ceiling, either by screwing it into the ceiling joists or using toggle bolts.


Attach the ground wire to the base of the component plate. Strip the wires and protect them to the particular track terminals. Attach each light fixture onto the track. Follow the instructions, some components click and others attach with a bracket.


Unless you are an electrical engineer, it is best to call an electrician for any project involving lighting or ceiling fans. Call us today to schedule a free consultation.


Florence Electrician Pros

Florence,SC  29501

843-212-4173

http://electricianprosflorence.com/