What Does An Electrical Engineer Do?

The introduction of electrical engineering as a new branch of engineering can be traced back to the 19^th century. Electrical engineers deal with the technology of electricity. They also work on different components, systems and devices, as well as from small microchips to large power station generators. Thomas Edison, George Westinghouse, Nikola Tesla, Guglielmo Marconi, and Philo T. Farnsworth are only a few of the most prominent pioneers in electrical engineering. They are responsible for turning the concepts and ideas about electricity into practical systems and devices that we now enjoy in this modern age. Since its inception, electrical engineering has been divided into different specialized categories like motors, power generation and transmission systems, batteries, as well as control systems. Electrical engineering also includes electronics, which also have different subcategories like telecommunications, radio frequency systems, signal processing, remote sensing, instrumentation, digital circuits, audio, video, as well as optoelectronics. The Job Of An Electrical Engineer According to the U.S. Bureau of Labor Statistics, the primary job of an electrical engineer is to design, develop, test, and monitor the manufacturing of electrical equipment like radar and navigation systems, electric motors, power generation equipment, and communications systems. If it is a real world and practical device that creates, conducts, or uses electricity, then it is most likely designed by an electrical engineer. Apart from that, Florence electrical engineers can conduct or compose the requirements for destructive or nondestructive testing of the reliability, performance, and long-term durability of various kinds of components and devices. Electrical engineers today design electrical systems and devices using fundamental components like coils, conductors, batteries, magnets, resistors, switches, inductors, capacitors, transistors, and diodes. Almost all electronic and electrical devices, from the generators running at an electric power plant to the microprocessors used in your phone, utilize these few fundamental components. Electrical engineers need critical skills including an in depth understanding of electronic and electrical theory, mathematics and materials. All these lets engineers design circuits to carry out specific functions and adhere to requirements for reliability, safety, as well as energy efficiency, as well as to predict their behavior, ahead of the implementation of a hardware design. Electrical engineers also rely heavily on computer-aided design systems to make schematics as well as layout circuits. They likewise utilize computers to check how electrical devices and systems work. For instance, computer simulation can aid in modeling a national power grid or perhaps a microprocessor. Given that, electrical engineers must also be proficient in using the computer. CAD systems also allows easy and quick alterations of designs as well as swift prototyping through the use of CNC machines. When hiring an electrical engineer, be sure to choose the right one. As mentioned earlier, electrical engineering has a lot of specializations. Not all engineers are the same. If you hire a wrong one, your project may take twice as long, cost twice as much, and worse, not work at all. Regardless of who you hire, it is highly recommended to employ a second independent engineer to check the work of your primary designer. This will protect you, lower your risk, and let you save money as well.

Call Florence Electrician Pros if are looking to hire an electrical engineer or a professional electrician.

Florence Electrician Pros Florence,SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/what-does-electrical-engineer-do/

Factors To Consider When Choosing Between Electric And Gas Ovens

There’s still a lot of debacle about gas and electric ovens. It’s even more difficult for first-time shoppers to decide on whether it’s best to go for gas or electric. If you do decide to go the electric route, ask your local electrician in Florence for more information on the correct model to get. However, you can’t discount the fact that gas ovens are still popular even to this date. So what’s the deal with the two types of ovens? Which one is better than the other? Here’s a quick comparison between gas and electric ovens that will hopefully lead you to a decision.

What your electrician has to say about ovens

Cost is the first factor that we’ll dive into. Buying yourself an oven, regardless of type, will set you back anywhere from $500 up to a few thousand dollars for the high-end models. However, asking price for each model isn’t where the debate stops. It’s with the energy consumption of both. Electric ovens that need to be hooked up into the electrical system must be dealt with by a licensed electrician. Electric – energy costs have been skyrocketing these days and using appliances that have high consumption ratings don’t help much with the monthly electric bill. However, a few minutes of baking each week wouldn’t be so bad for your bill. For the usage cost, it’s best to use electric ovens for light use only. If you plan on preparing dishes that require hours of cooking time, you should look at a different type of oven. Gas – while gas prices are relatively high these days, it is still much cheaper than electricity. Whether you’re just cooking cookies for your kids every now and then or roasting an entire turkey for the family, gas ovens won’t let you down in terms of average usage cost. Evenness of cooking Gas and electric ovens produce different results. If you’ve been using ovens for a long time, you already know that there’s a significant difference between the two. As for evenness of cooking, there’s no doubt that electric ovens will win in this category. Electric ovens provide even heat. Meanwhile, gas ovens often have hotspots inside where some areas are hotter than other spots. Temperature accuracy In baking, the temperature is everything. Electric ovens are at an advantage still since they are calibrated and can easily be set to the right temperature and maintain it for the entire usage. Meanwhile, gas ovens are a little bit tricky. Since most gas ovens don’t have a specific meter in place to tell you the exact temperature inside the oven, it’s hard to get it right. However, this could be alleviated with the use of oven thermometers which can accurately tell you the temperature inside the oven. While some electric ovens simply need to get plugged to the outlet, others require an electrical contractor to have it setup. Ovens and other electrical appliances that need to be hooked up to your electrical system must be wired and thoroughly placed by professionals like Florence Electrician Pros.

Call Florence Electrician Pros if you have any electrical-related problems.

Florence Electrician Pros Florence,SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/factors-consider-choosing-electric-gas-ovens/

Top 3 Circuit Breaker Box Problems

Everything in your house that gets power from the wall outlet connects to an electrical panel where connections can be turned on or off. A lot of homeowners don’t really pay much attention to what’s going on with circuit breaker boxes. However, it should be noted that breaker boxes are very important. They serve as a failsafe mechanism whenever there’s a problem with a particular circuit like overloading or short circuits. It is crucial that breaker boxes be maintained and kept in proper working condition at all times. Any damage to the breaker box and the circuit breakers inside can have a severe negative impact on the entire house and the people who dwell in the residence.

Common issues with an electrical panel

1. Panel overcrowding – a lot of the homes that were built or remodeled over the last ten years commonly have a 200-amp electrical panel installed. For a regular household, a 200-amp electrical panel would suffice. It could handle the day-to-day energy usage of the entire family. This includes lighting, entertainment devices, refrigerators, washing machines, and more. In a nutshell, a 200-amp service panel is a norm these days. However, older homes that were built in the early 1990s were equipped with a 100-amp electrical panel. This means the service panels installed back then won’t be powerful enough to suffice the usage of today’s families. You might want to have an emergency electrician take a look at your service panel if you’re living in an older home.

1. Insufficient capacity – circuit breakers are only rated to handle a certain amount of load. Once the load reached a breaker’s set threshold, it would trip. This causes the electricity leading to a certain outlet to be cut off. This is the normal process of how a circuit breaker works. However, older homes may have circuit breakers that are of lower capacities. This means you won’t be able to use equipment or appliances that go beyond the rated capacity of the breaker. If you do attempt to use an electrical appliance that is rated higher than the capacity of the breaker, it will only trip the breaker and you won’t be able to use the appliance. It’s also dangerous to overload a particular outlet since the wires attached to the outlet can handle only a certain amount of electricity. If too much electricity is drawn from one outlet, it could cause the wires to heat up and malfunction.

1. Corrosion – due to years in operation, the circuit breaker could fall victim to corrosion. It is always a good idea to have your circuit breaker boxes checked every so often to avoid any electrical mishaps. Corrosion could lead to a lot of things including circuit breaker failure. The breaker could frequently trip or worse, it won’t trip over an overload which may lead to house fires. In case you spot any corrosion in your service panel, call your local Florence emergency electrician right away and have it serviced.

When faced with electrical issues at home, call your electrical contractor like Florence Electrician Pros right away. Try to stay away from DIY electrical repairs as it is not recommended and may cause harm.

Call Florence Electrician Pros if you have any electrical-related problems.

Florence Electrician Pros Florence,SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/top-3-circuit-breaker-box-problems/

Electrical Repairs – The Essentials On Electrical Safety

Making electrical repairs at home is not the most ideal thing that homeowners could do. There’s a lot of risks involved if you don’t know or only have a little knowledge about electrical repairs. That’s why most homeowners often hire an electrician or emergency electrician in case there’s any problem with the electrical system at home. However, there’s always the DIY route that you can take. But before you grab your tools, be educated about electrical safety and how you can handle repairs without running the risk of electrocution or worse. Here are some tips that you can follow:

DIY electrical repair and safety

Always test for power – It’s always better to be safe than sorry. If you’re taking out an old lighting fixture or installing a new wall outlet, you should always check for power first. You can use your multi-meter for this operation. Despite running off the power, it does not fully guarantee that there is no longer any power in the circuit. There are still chances that the wirings connected to the circuit are still live. It could be a possibility that the circuit breakers were labeled incorrectly, leading to a possibility of electrocution if you don’t double-check. A good rule of thumb is that safety is the number one priority in any given task and especially when it deals with electricity. Use the right wire gauge – if you’ve seen different wiring setups before, you would notice that the wires are colored, sized, and labeled differently from one another. These details indicate what type of wire is best suited for certain applications. A certain gauge of wire is only rated to a particular amount of electricity. In simple terms, a piece of wire can only handle a certain amount of electricity. Going beyond a wire’s rated capacity will cause it to heat up and cause electrical fires. This is why it is important to know how to read wire gauges and understand the capacity of each. This is why an electrician is best suited for electrical repairs especially if there are a lot of wiring involved. Make sure wires are tightly connected – one cause of electrical fires is inadequate wire connections. When connecting two pieces of wires together, there’s a certain technique and tools needed. When splicing two wires together, only use approved wire connectors. Be sure that all terminals are firmly screwed tight. Screw-terminal connections are easy to handle and ensure that everything is properly secured. Push-fit connections, however, are a bit tricky and often loosen when improperly used. Hire an electrician when in doubt – if you find yourself in a tight situation that is far beyond your electrical skills, don’t hesitate to call a Florence electrician. There are just those instances that you can’t complete a particular electrical repair. There’s no shame in trying. However, when you see that you won’t be able to make the repairs on your own, always seek professional assistance. Professional electricians, after all, are experts in their field and can handle any sort of electrical problem you throw at them. Experts like Florence Electrician Pros have all the right equipment and experience to handle any electrical issue whether it’s residential or commercial. For more information on the installation of new appliances, call Florence Electrician Pros today! Florence Electrician Pros Florence,SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/electrical-repair-safety-essential/

Electrical Tips To Boost The Value Of Your Home

There are a lot of things you can do to increase the value of your home and this include making changes to your electrical system. Lighting modifications such as using LED bulbs and installing exterior lighting can help improve the ambiance of your home. Meanwhile, replacing plates and panels can help make your home more efficient and safer. You can use the tips provided below not only to light up your living space but also make your home easier to sell when the right time comes. Some electrical upgrades you can do yourself but there are also those that require the assistance of an electrician. Switch To LED Potential home buyers would like to be able to picture themselves living in your house, therefore, you need to make it as inviting and as warm as possible. You can do this by changing how you light up your home. In case you are still using incandescent bulbs, think about this: Incandescent bulbs transform more than 90% of their energy to heat instead of light. This reflects on your electricity bill, both making your air conditioner work extra and in wasted energy from your incandescent lights. In case you want your home to really attract potential home buyers, you should think about changing your lighting fixtures to light emitting diode or LED bulbs. They create light whenever a current runs through the tiny semiconductors placed inside the bulb. Because of the small amount of electricity that LED bulbs require, your usage of electricity will significantly drop. LED bulbs also last much longer compared to the conventional incandescent bulbs, which can also last to about 250 days if used eight hours a day. Meanwhile, LED bulbs can last up to 3,125 days at the same rate of usage. All these translate to bigger cost savings and gains when you convince a potential buyer to purchase your home. Upgrade Outdoor Lighting Whenever potential buyers visit your house, their first impression will always be your home’s exterior. You need to make the most out of this opportunity by installing exterior fixture lighting to improve your home’s curb appeal. Floodlights can be a significant selling point for potential home buyers especially if they are particular about safety. Floodlights can help lessen the number places a burglar can hide in your yard. The installation of lights on the walkway that leads up to your door showcases your attention to detail. It also makes your home look and feel more inviting and much safer. Make Electrical Updates Panel Replacement – in case you are selling an older home, you need to think about replacing your outdated breaker panel or old fuse box. Old panels are not built to take on contemporary electricity levels and could lead to overheating, thus increasing the risk of house fires. Do not attempt to replace this piece of equipment without the assistance of a professional Florence electrician because it generally involves rewiring, which could be hazardous. Plate replacement – you should also consider installing brand new plate covers for your power outlets and light switches. Older marble or metal finishes can transform these dull necessities into elegant accents. Before you start working on them, make sure that you turn off the power outlet to the affected outlets. Always remember that touching the side of a live power outlet can give you an electric shock. Childproof outlets – if you are changing your plates, you should consider investing in important electrical parts like childproofing power outlets. This is particularly crucial when you are targeting home buyers with kids.

Whether you are planning to sell your home or you just want to make sure that your home is safe and efficient, call Florence Electrician Pros if you are considering upgrading your electrical system.

Florence Electrician Pros Florence,SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/electrical-tips-boost-value-home/

Top Reasons That Show Hiring An Electrician Is Important

Not all people pay attention to the electrical system they have at home. This is perfectly normal as electrical systems don’t encounter problems too often if they are installed properly. However, there are instances wherein some parts of the electrical system started failing. In such cases, the expertise of an electrical contractor is very much needed. Although DIY electrical repair is an option, it does not apply for everyone and on all occasions. Fixing minor electrical issues like replacing a broken light bulb doesn’t typically require aid from an electrician. However, some cases call for professionals. Here are some of those cases:

Cases where you need an electrician

Repairs on electrical systems – if you require electrical repairs in Florence, you should directly call an electrical contractor. In the majority of cases, an electrician would be needed to carry out the repairs. This is due to a number of reasons. First of all, there’s the issue of safety. With DIY electrical repairs, you can’t assure your own safety as well as the safety of the entire building. Meddling with electrical systems without proper knowledge is downright dangerous. The second reason is the need permits. Not all repairs in the electrical system require a permit. However, major repairs will need a permit to be completed. Wiring and rewiring of a house or building – installing the wiring for a home or building is not an easy task. It requires skills and knowledge of routing electrical wires throughout a given perimeter. Routing the wires and using the right wire gauge is also important Aside from that, you would need equipment to test the wires after installation. Installation of appliances – not all appliances need to be installed by an electrician. You won’t need any help with your toaster and microwave since they can just be plugged in and operate as usual. However, some appliances require the expertise of an electrician to work properly. Installing and repairing circuit breakers – a residential electrician is needed whenever installing or repairing a faulty circuit breaker. This is not a task that an average homeowner should deal with. A circuit breaker usually deals with high voltage electricity. Getting yourself electrocuted with high voltage electricity can sometimes be fatal. Things you can do to improve electrical safety at home

• Never overload electrical outlets
• Never use extension cords as permanent outlets
• Never place cords beneath furniture, under carpets and rugs
• Only buy electrical products that meet industry standards
• Install smoke alarms on certain places at home
• Switch off appliances before plugging them in
• Never use electrical equipment in damp areas unless they have an IP rating

These are just some of the things that you could do to ensure your electrical safety at home. Other than that, always hire an electrical professional for any repairs you might need. Professionals such as Florence Electrician Pros have a stellar reputation when it comes to the installation, repair, and maintenance of electrical systems in both residential and commercial spaces.

For more information on electrical upgrades, safety, and more, call Florence Electrician Pros.

Florence Electrician Pros Florence, SC 29501 843-212-4173 http://electricianprosflorence.com/

http://electricianprosflorence.com/reasons-hiring-electrician-important/